KEY features
- Pro-Active sprung tines or Rigid tine options*
- 3 in 1 combination of tines, levelling board and rings
- Leading tines spaced at 235mm, standard section 50 x 25mm, shearbolt protected
- Levelling board sprung leaves and roll rings spaced
at 235mm centres - Patented system of intermeshed sprung leaves and rings for optimum clod breakage
- Levelling board adjustable for height (hydraulic)
and pitch (pinned) - Scrapers for rear row of rings
- Hydraulic brakes standard on 8m and 10m models
- High flotation tyres (400/60 on 3.3m, 500/50 on all other models)
- Low drawbar load compatible with other “Simba System” machines
optional extras
- Hydraulic rear drawbar c/w 2 pipes (3.3m & 4m models only)
- Hydraulic rear drawbar c/w 4 pipes (4.6m - 6.6m models only)
- Air brakes (8m &10m models)
- Walking tandem axle transport wheels (8m & 10m models)
- Sprung mounted contour following rear roll (8m & 10m models)
- Speed-Lube, manual centralised (not 8m & 10m models)
- Speed-Lube (fully automated)
- Cranked tines in addition to straight
related links
- photography [908Kb]
- BROCHURE [1.27Mb]
- parts manual [668kb]
- service manual [4.0Mb]
Download files are in a Acrobat Reader©, Winzip© or Quicktime™ format. If you do not have these free plugins installed, click on the links and install.
Cultivation for medium to heavy soils
Standard feature is the unique ability to manually adjust the rake angle of the levelling board. The six different settings allows the superb utilisation of the levelling effect, irrespective of soil types and soil moisture content.Simba's CultiPress combines several well-proven Simba elements to complete three actions in one pass - cultivating, levelling and consolidating the seedbed, and leaving a weatherproof finish that is often ready for drilling with no further cultivation. This range is more suitable for use on heavy ground.
Best run at high working speeds, the CultiPress - available in working widths from 3.3m to 10m - offers users the optimum combination of effectiveness and timeliness, helping them achieve highly effective cultivations, combined with high output and excellent cost control. The first element of the CultiPress is a set of Simba's cultivating tines. Rigid tines which can be individually adjusted using 6 different height settings so the level of cultivation can be matched to needs (not available on the 8 & 10m versions).
ProActive Tines are now standard, these being mounted on a 150mm x 12mm leaf that offers greater vibration and cultivating effect (although these are standard on the 8 & 10m machines).
The tines are followed by a full width, fully hydraulically adjustable levelling board with extended leaves which intermesh with the two rows of 600mm DD Rings, in a highly effective arrangement patented by Simba, but being used by other manufacturers under licence.
Working at speed, the leading tines create a boiling action in which many clods are shattered by clod-to-clod contact.
Others are shattered by the levelling board, and any remaining are positioned by the intermeshing levelling boards directly ahead of the DD Rings. These DD Rings are 'in line' allowing weight to be transferred rearward for greater single gang loadings if required in very hard dry conditions.
The implement is highly flexible in its range of potential uses: It can be used as a final press on top of ploughing or in tandem behind Disc Harrows or selected cultivators or pulling a Cambridge Roll as a finishing tool.
SPECIFICATIONS
| working width | transport width | No of Rigid tines | No of Pro-active Tines | weight (kgs) | power req. (hp) |
|---|---|---|---|---|---|
| 3.3m | 3.45m | 13 | 11 | 3480 | 115-160 |
| 4.0m | 4.15m | 17 | 13 | 3910 | 140-190 |
| 4.6m | 2.95m | 19 | 15 | 5660 | 160-220 |
| 5.5m | 2.95m | 23 | 19 | 6630 | 195-260 |
| 6.6m | 2.95m | 27 | 21 | 7220 | 230-310 |
| 8.0m* | 2.95m | n/a | 25 | 10,500 | 300-420 |
| 10.0m* | 2.95m | n/a | 35 | 13,000 | 380-480 |
