KEY FEATURES
- Disc diameter 500mm
- Disc spacing (net) 125mm
- Working depths of tines 150-250mm
- Tine type ST – trip reset
- DD Lite rear roller – 600mm diameter, 200mm DD ring spacing
- Transport width 2.7m
- Cat 3 linkage pull
- Hydraulic brakes
- Full European road lighting kit
- Rear drawbar c/w four hydraulic pipes*
- Tyre Size 500/50-15, 14ply
*Certain loadings apply - contact your dealer for clarification
OPTIONAL EXTRAS
- 150mm DD ring spacing
- Low Disturbance legs (LD)
- Air Brakes Kit
- Oilseed Rape (OSR 8) Kit
- Cat 4 linkage pull
related links
- PHOTOGRAPHY - [3.7MB]
- BROCHURE - [1.25MB]
An extra dimension in cultivator performance
Built around proven, innovative components mounted on a central chassis, SL cultivators are capable of carrying out a number of operations in a single pass.
With working widths of 4, 5 and 6 metres respectively, the SL 400, 500 and 600 models feature a Disc Tine Disc (DTD) configuration, which comprises a single row of X-Press type discs followed by 2 rows of ST tines, another set of discs and a 600mm DD Lite rear roller.
The design of these machines ensures that they can work at shallow depths with the 
discs and deeper depths with loosening tines as two distinct operations within the machine.This is a different concept to some other machines that operate on a twin-pass principle, where deeper working tines, for example, have to supplement the working operation of discs. This can result in a compromise where clods are boiled to the surface, reducing seedbed quality. With the SL, the key design criteria of the tine is to give a complete shatter of the soil profile at depth without bringing clods and subsoil to the surface.
500mm Pro-Active Discs Discs
One row of serrated discs at the front of the machine and another following the tines chop and incorporate the surface trash. Manufactured from boron steel to give extended working life they are 500mm (20”) in diameter. Each disc is mounted on a Pro-Active leaf spring allowing improved contour following and stone protection. The discs working angle can be easily adjusted. A track rod system operated by a single handle gives stepless change.
ST Tines
Choice of tine designTwo rows of Shallow Tines (ST) are fitted as standard. The number of tines varies between 10 and 14, depending on the model/working width. The Simba ST trip reset tines have six depth settings in 25mm increments and a choice of knock on points, to create a cultivation effect that can be readily matched to the soil type and conditions. Low Disturbance (LD) Tines are available as an option. This innovative leg performs considerable cultivation and soil restructuring at depth in the root zone without disturbing or inverting any weathered tilth from the surface.
Rear DD Roller
The soil is consolidated at the rear of the machine with a DD roller featuring 600mm rings at a closer spacing than normal. 
Rear DD RollerThis arrangement not only firms the ground to depth but also leaves a fine, level, weatherproof finish. A lower scraper behind each pair of rings ensures that any blockages in damp conditions are minimized.
Rear Drawbar
Fitted as standard, a rear drawbar with hydraulics enables you to pull a light roll or press in tandem with the cultivator. When an optional Oilseed Rape Kit is fitted, the rape seed is blown to the rear of the DD rings on a firmed level surface. A following roll consolidates the seed without loss of moisture.
SPECIFICATIONS
| MODEL | WORKING WIDTH | WEIGHT (kgs) | No. OF TINES | TYRE SIZE | POWER (HP) |
|---|---|---|---|---|---|
| SL 400 | 4.0m | 5,850 | 10 | 500/50-15 | 200-360 |
| SL 500 | 5.0m | 7,400 | 12 | 500/50-15 | 250-420 |
| SL 600 | 6.0m | 8,400 | 14 | 500/50-15 | 300-420 |
