KEY FEATURES
ST (Shallow Tine) Models
- Disc diameter 700mm cutaway blades
- Disc spacing (front & rear) 250mm
- Working depths of tines 150-250mm
- Tine type - Terragrip spring loaded
Standard Solo Models
- Disc diameter 700mm cutaway blades
- Disc spacing (front & rear) 250mm
- Working depths of tines 200-300mm
- Tine type - hyrdaulic reset subsurface legs
Stubble to seedbed in one pass
Disc spacings of 25cms (10”) are the same on the front and rear gangs which helps leave a fine, level finish. A Simba DD rear roller with an optional following harrow means that the finer finish can be tailored to individual requirements. A finer finish for immediate drilling or a corrugated finish (with the following harrow raised for a weather proof finish) are both possible. Matched disc spacings also ensure that a level finish is achieved irrespective of forward speed, making the Solo ST an easy tool to field set.
Many purchasers have mounted rape applicators on the rear of the machine and successfully broadcast rape onto the seedbed behind of the final roller to achieve a highly cost effective establishment system.
The smaller Solo ST’s (330/380) have the option of a rear drawbar so that following presses can be fitted if required. This again increases the flexibility and versatility of the machine and this gives the users the option of leaving an open seedbed (without the press) suitable for over wintering or a finer finish (with a press) suitable for immediate drilling.
Flotation tyres are fitted across the range 500/50 x 17 on 330 and 380 models and 700/50 x 22.5 on 450 and 600 models. Full auto greasing kits can be supplied if downtime is an issue and the optional rape applicator kits can be ordered with or without an additional following harrow.
New for 2007 is the Low Disturbance Leg which can now be fitted into all Solo ST machines. This leg is designed specifically for rape establishment and shatters the ground at depth with little surface heave.
SPECIFICATIONS
MODEL |
WORKING WIDTH | NO. OF TINES | POWER REQ. (H.P.) | weight (KGS) |
|---|---|---|---|---|
ST 'R' TYPE (Rear Mounted Roller) |
||||
| 330 | 3.3m | 7 | 180/220 | 6250 |
| 380 | 3.8m | 9 | 220/250 | 6900 |
| 450 | 4.5m | 11 | 270/320 | 9700 |
| 600 | 6.0m | 15 | 330/370 | 12000 |
SOLO ST (Mid Mounted Roller) |
||||
| 330 | 3.3m | 7 | 170/200 | 6250 |
| 380 | 3.8m | 9 | 220/250 | 6900 |
| 450 | 4.5m | 11 | 270/320 | 9700 |
| 600 | 6.0m | 15 | 400+ | 12000 |
'R' TYPE (Rear Mounted Roller, Hydraulic Tines) |
||||
| 330 | 3.3m | 4 | 240/270 | 6050 |
| 450 | 4.5m | 6 | 300/350 | 9400 |
| 600 | 6.0m | 8 | 400/450 | 11500 |
SOLO (Mid Mounted Roller, Hydraulic Tines) |
||||
| 330 | 3.3m | 4 | 270/300 | 6050 |
| 450 | 4.5m | 6 | 350/400 | 9000 |
| 600 | 6.0m | 8 | 400+ | 11300 |
