KEY FEATURES
- Pro-Active sprung tines for improved protection and trash clearance
- Straight leg or cranked tine options
- Levelling board inter-meshing with DD roller
- 700mm diameter DD roller, 230mm DD ring spacing
- Hydraulically braked axle
- All models fold to under 3m for transport
optional extras
- Rear drawbar c/w 4 pipes
- Cranked tine with sweep on Pro-Active tine
- Air braked axle
- Speed-Lube (fully automated)
- Speed-Lube (manual centralised)
- Drawbar to suit FG Cultivator
related links
- photography [880Kb]
- BROCHURE [1.21Mb]
- parts manual [592Kb]
- service manual [200Kb]
Download files are in a Acrobat Reader©, Winzip© or Quicktime™ format. If you do not have these free plugins installed, click on the links and install.
Cultivation for light to medium soils
Simba's Unipress is a rugged cultivator/press for use on light and medium soils. It performs three operations in one pass, helping complete cultivations effectively while saving both time and money.
Preparing the machine for transport is easy as the UniPress folds vertically and tilts rearwards, which significantly improves stability when moving from field to field.
The machine features leading tines which cultivate and create a tilth ahead of the full width, fully-adjustable levelling board which further works the soil and either smashes clods or aligns them ahead of the large diameter 700mm DD Rings (in the arrangement used in the Cultipress and patented by Simba). The rings crush them and leave a well cultivated, consolidated and weatherproof seedbed which is usually ready for drilling with no further cultivation. Simba now offers its ProActive tines as standard for the Unipress. These are mounted on a 150mm x 12mm sprung leaf which offers greater vibration and cultivation, while also protecting them against damage by stones etc by enabling them to trip out of the soil and re-set in work immediately.
"It works down ploughing very well and leaves a ridged surface that does not cap"
Michael Turner
Holkam, NorfolkThe range runs from the 4.6m model that requires between 120hp and 170hp to operate, up to the 8.2m model that needs 200hp - 260hp, so there is a model suitable for most farm sizes.
The working depth of the tines is independently adjustable, so those running in the wheel-tracks can be set deeper to lift out any compaction without compromising the efficacy of the overall cultivation. Should further consolidation be required a rear drawbar can be fitted to tow a Cambridge Roll or similar tool.
SPECIFICATIONS
| working width | No of Pro-active tines | weight (kgs) | power req. (hp) |
|---|---|---|---|
| 4.6m | 15 | 2760 | 120-170 |
| 5.5m | 17 | 3300 | 140-190 |
| 6.6m | 21 | 3960 | 150-220 |
| 7.2m | 23 | 4560 | 180-240 |
| 8.2m | 27 | 4920 | 200-260 |
