KEY features
All models are fitted with cutaway discs 500mm in diameter. Disc spacing is 250mm in both front and rear gangs (nett spacing 125mm) and all trailed models fold to 3m for transport.
optional extras
mounted x-press
- Shim type track eradicators
- OSR Applicator Kit
trailed machines
- Track eradicators (2 Pro-Active tines per side)
- Rear drawbar with hydraulic services (not 8 & 10m)
- Following Harrow
- OSR Applicator Kit
related links
- photography
(mounted) [360Kb] - photography
(trailed) [908Kb] - leaflet [388Kb]
- parts manual [4,4Mb]
- service manual [1.2Mb]
- case study [384Kb]

Profi features the X-Press
range in their magazine!.
Click here to download and view
the article.
High speed, one pass cultivation
The X-Press is a high-speed one-pass cultivator designed to work at up to 100mm depth. It chops and mixes straw and stubble very effectively in reduced tillage systems, but is equally adept at working down ploughing.
A turnbuckle allows quick and easy adjustment of the gang angling. An acute angle ensures that maximum mixing of stubble is achieved in one pass, whereas a shallow angle is often employed to ‘chop down’ ploughing as and when required.
In both scenarios it leaves a well cultivated, levelled, consolidated and weatherproof seedbed which is usually ready for drilling with a cultivator drill.
The implement features two gangs of 500mm discs running ahead of a single line of Simba's DD press rings or DD Lite . The discs chop and mix straw/stubble. Uniquely among such cultivators, the disc angles on the X-Press can be adjusted from 10 - 25 degrees to maintain penetration without transferring weight off the rear roller. The technique used by many competitor machines which can seriously reduce the consolidation the press achieves.
The smallest model, the 3m Mounted X-press, comes with all the innovative features of the larger models but in a smaller machine. Fully adjustable gang angling and the unique DD Lite rear roller deliver the right balance between penetration and consolidation to give you the maximum flexibility to work on stubble or ploughing. With a power requirement of around 80hp, many more farms can now benefit from Simba’s innovative products.
Narrow or shallow gang angles are used when chopping down ploughing. Wider gang angles are employed when more of a mixing and levelling operation is required, for example incorporating stubble.
Pro-Active disc units are now available on all models of the X-Press to give improved protection against stone damage. The heavy duty spring steel mounts, with a trip height of 130mm, give improved contour following whilst maintaining a consistent depth at high forward speed.
The discs are mounted on Simba's Pro-Active Disc Unit, which offers optimum protection against stone damage by enabling the discs to trip right out of the ground and automatically re-set to the desired working depth. This also minimises downtime and optimises output. Working widths are from 3m and 4m mounted models which need 80hp - 100hp, to 4.6m (140-150hp), 5.5m (160-180hp), 6.6m (200-220hp), 8.0m (300-350) and 10m (350-400) models.
All trailed models are fitted with 500/50x17 tyres and a rear drawbar is offered as an option for following implements such as Cambridge Rolls (not available on the 8 & 10m versions).
Additional Features applicable to 8m & 10m models:
- Spring mounted contour following rear roll
- Hydraulic adjustment of gang angle
- Intermeshed levelling boards (option)
- Hydraulic/air brakes (option)
- Walking tandem axle transport wheels!
SPECIFICATIONS
| working width | transport width | no. of discs | weight (kgs) | power req. (hp) |
|---|---|---|---|---|
| mounted machines | ||||
| 3.0m | 3.0m | 20 | 1750 | 80-100 |
| 4.0m | 4.0m | 32 | 2440 | 110-140 |
| 4.0m FW | 3.0m | 32 | 2920 | 125-150 |
| trailed machines | ||||
| 4.6m | 3.0m | 36 | 5540 | 140-150 |
| 5.5m | 3.0m | 44 | 6350 | 160-180 |
| 6.6m | 3.0m | 52 | 7570 | 200-220 |
| 8.0m | 3.0m | 62 | 11,500 | 300-350 |
| 10.0m | 3.0m | 80 | 14,00 | 350-400 |
