Profi features the X-Press
range in their magazine!.
Click here to download and view
the article.
Increase your X-Press performance with the shallow tine toolbar
Simba’s new ST bar with 5 ST tines can now be fitted ahead of a 3m & 4m mounted XPress. This transforms the machine into a one pass cultivator for tractors between 150hp & 180hp.
The loosening tines, staggered for trash clearance, working down to 200mm. These are followed by the shallow working discs on the X-Press which create a fine surface tilth. The job is completed by a rear DD Lite Roller, which consolidates the ground to leave a weatherproof finish. Total flexibility, use the machines separately or combined - you have the option depending on the job required or the power available.
SPECIFICATIONS
| 3.0m | 4.0m | |
|---|---|---|
| Working Width (mm) | 3000 | 4000 |
| Transport Width (mm) * | 2645 | 3580 |
| Transport Length (mm) * | 860 | 860 |
| Weight (kgs) | 530 | 710 |
| Tines - Qty/Spacing (mm) | 5/580 | 7/565 |
| Points Knock on | 100mm | 100mm |
| Tine Adjustment | Manual | Manual |
| Hydraulic Services | n/a | n/a |
| Road Lights | n/a | n/a |
| Forward Speed (KmH) | 6 - 11 | 6 - 11 |
| Power Requirement (hp) | 60 - 80 | 80 - 100 |
